Instructions for Use

Surgical Tie Visor Mask: Best Practices for Use

PRIMED Surgical Tie Visor Masks are disposable masks designed to provide coverage of the nose and mouth during medical procedures. Featuring an integrated visor for eye protection and adjustable ties for a secure fit, they include a flexible nose piece to help shape the mask to the face and an adjustable visor to reduce glare.

ASTM F2100 tested
Step-by-step procedure

Wearing your mask correctly

Follow each step in order. Switch tabs to see how to put the mask on and how to safely remove it.

Wash and Dry Your Hands

Thoroughly wash and dry your hands.

Remove the Mask from Packaging

Remove the mask from its packaging. Hold the mask with the outer layer out. The outer layer will be facing up and is usually coloured. This layer should be away from your face when donned. Grasp the edges of the mask and gently bend the nose piece, ensuring your mask and visor are centered.

Open the Pleats

Hold the top of the mask at the center of the metal nose piece and pull the bottom edge of the mask to open the pleats. Position the mask on your face with the nose piece centered on the bridge of your nose.

Fasten the Ties

Fasten the top tie at the crown of your head, followed by the bottom tie behind your neck.

Shape the Mask to Your Face

Slide your fingers underneath the bottom of the visor. Press the nose piece to the bridge of your nose and along your cheekbones to shape the mask to your face.

Adjust the Visor

Adjust the visor as needed to reduce glare.

Wash and Dry Your Hands

Thoroughly wash and dry your hands.

Release the Mask Ties

Release the mask by breaking or untying the bottom tie followed by the top tie. Avoid touching other parts of the mask to prevent contamination.

Dispose of the Mask

Dispose in an appropriate waste container.

FIT CHECK
How do I know my mask is on correctly?
Metal nose piece at the top

The formable metal nose piece sits along the top edge, moulded to the bridge of the nose.

"Waterfall" pleats

The pleats typically fall downwards and away from the nose.

Colour always faces out

The white - or smoothest - side sits against the skin; the light-green colour always faces outward.

Nose and mouth covered

The mask fully covers both the wearer's nose and mouth. Some mask styles may have pleats folding upward as well as downward. Contact your supplier if you require clarification.

COMMON QUESTIONS

Frequently asked questions

ASTM refers to the American Society of Testing and Materials American Society of Testing and Materials (ASTM). ASTM is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services—including those in healthcare.

‍

Yes, there are three unique levels of protection with ASTM-rated medical masks. Level 1 masks have the lowest barrier of protection, while Level 3 masks have the highest barrier of protection. For greater clarity on the differences, refer to the information in the charts below:

No. Nanoform Graphene is not added to PRIMED raw materials, used as a coating or otherwise employed in any form nor has it ever been used by PRIMED.

‍